在镇江地区从事铝艺大门、安全防护栏研发、设计、生产、安装一条龙服务

扬中市乐夫装饰材料经营

网站首页 > 行业资讯 > 时事新闻

工业热风炉使用时如何解决噪音问题?消声器

2018-12-11 19:00:02 扬中市乐夫装饰材料经营 阅读

对于热风炉产生的噪音:可以在热风炉风扇叶片处加套消声器,把整个电动机半围封起来,阻挡了了外壳向外传播噪音的道路,因此具有比较好的消音性能,对于降低热风炉噪音的降低具有很好的效果。2、对于排气装置产生噪音:可以采取小孔喷注型消声器,将消声器安装于放空管口,同时应注意选用排气消声器应注意消声器的排气力、流量温度遵循放空蒸汽的要求,保持有一定强度和耐腐蚀性,在高寒地区使用还应注意蒸汽结冰堵塞小孔而出现过压放空的危险,为此要采取必要安全措施。

For the noise generated by the hot blast stove: a muffler can be installed at the fan blade of the hot blast stove, and the whole motor can be semi-enclosed, which prevents the road of noise transmission from the outer shell. Therefore, the muffler has better muffling performance and has a good effect on reducing the noise of the hot blast stove. 2. Noise generated by exhaust device: small-hole jet muffler can be used to install muffler at the outlet of exhaust pipe. At the same time, attention should be paid to the selection of exhaust muffler. The exhaust force and flow temperature of muffler should comply with the requirements of exhaust steam, maintain a certain strength and corrosion resistance, and steam should also be paid attention to in the use of high-cold areas. The danger of overpressure venting is caused by freezing and blocking small holes. Therefore, necessary safety measures should be taken. 3、水泵产生的噪音:可以对对热风炉房的墙体和屋顶加装隔音和吸声层,解决水泵运转时产生的噪音问题。

3. Noise generated by water pump: It is possible to install sound insulation and sound absorption layer on the wall and roof of hot blast stove house to solve the problem of noise generated by the operation of water pump.



标签:   铝艺大门 镇江铝艺大门 铝艺大门厂家 镇江铝艺护栏 铝艺护栏 热风炉