在镇江地区从事铝艺大门、安全防护栏研发、设计、生产、安装一条龙服务

扬中市乐夫装饰材料经营

网站首页 > 行业资讯 > 铝艺大门

在常州要选购好铝艺大门需要“看”“摸”“敲”“开”四绝招

2019-06-14 09:59:38 扬中市乐夫装饰材料经营 阅读

现在常州市场上的常州铝艺大门,主要还是从硬件结构和用材上入手。在结构用材上,门套和门边采用高科技不易开裂的铸铝为材料,表面采用阳极氧化处理,具备了一定的硬度,从而在耐磨、耐压,防变形和防褪色方面有一定改进。铝艺大门门框结构采用整体压铸铝铸造而成,从而能达到无缝隙、密封、隔音的效果。常州铝艺大门门面材料是铝艺大门生态环保的重要因素,不同的企业则采用了不同的材料,有高分子有铸铝板、进口饰铝面板、黄铝板等。所用的面板材料如果达不到国家生态环保标准或铝门标准的,对门的安全性,耐久性甚至对人体带来间接或直接的健康影响。

At present, Changzhou Aluminum Art Gate in Changzhou Market is mainly based on hardware structure and materials. On the structural materials, the door cover and the edge are made of high-tech cast aluminium, which is not easy to crack, and the surface is treated by anodic oxidation, which has certain hardness, thus improving the wear resistance, pressure resistance, deformation resistance and fading resistance. The door frame structure of the aluminium art gate is made of integral die-casting aluminium, so as to achieve the effect of seamless, sealing and sound insulation. The facade material of Changzhou Aluminum Art Gate is an important factor of ecological and environmental protection of Aluminum Art Gate. Different enterprises adopt different materials, such as high polymer, cast aluminium plate, imported decorative aluminium plate, yellow aluminium plate, etc. If the panel materials used fail to meet the national ecological environmental protection standards or aluminium door standards, the safety and durability of the door will even have indirect or direct health effects on the human body.

一、看

I. Look

镇江铝艺大门好坏主要从漆面的处理可以看出来。看,要注意两点,一是打侧光看漆面是否平整,是否有麻点存在,一般来说好的强化烤漆别墅铜门在漆面的处理上比较到位。二是看铝艺大门的拼接处、沟槽处是否处理细致,好的产品和次的产品从大面上是区分不出来的,主要还是细节的处理。

The quality of aluminium door can be seen from the treatment of paint. Look, we should pay attention to two points, one is to sidelight to see whether the paint surface is smooth, whether there are pits, generally speaking, the good reinforced paint villa copper door in the paint surface treatment is in place. The second is to see whether the joints and grooves of the aluminium art gate are handled meticulously. Good products and inferior products can not be distinguished from the general surface, mainly the details.

二、摸

2. Touch

一定要用手背摸,手背是感觉最敏感的部位,感觉铝艺大门漆面的处理是否饱满,喷涂7遍和喷涂3遍是完全不一样的感觉。光滑、圆润、丰满,手感比较光滑。

Must touch with the back of the hand, the back of the hand is the most sensitive part of the feeling, feel whether the aluminum door paint treatment is full, spraying 7 times and spraying 3 times is completely different feeling. Smooth, round, plump, smooth feel.

三、敲

3. Knock

低价位的铝艺大门是不可能做到实心的,许多铝艺大门是用木条打的网格(这算是比较好的)甚至填充一些泡沫,有的则是间隔开打木条。从敲的声音来感觉铝艺大门的内在工艺。

Low price aluminum doors can't be solid. Many aluminum doors are made of wood chips (which are better) or even fill some froth, others are open at intervals. Feel the inner workmanship of the aluminium door from the sound of knocking.

四、开

IV. Opening

敲的方法如果不好分辨就用开的办法,开门的时候能感觉到铝艺大门的分量,有的铝艺大门在开启的时候是轻飘飘的,有的则感觉很沉重。及对地板造成划伤。

If the method of knocking is not good to distinguish, use the method of opening. When opening the door, you can feel the weight of the aluminium art gate. Some aluminium art doors are light when opening, others feel heavy. And scratch the floor. 



标签:   铝艺大门 常州铝艺大门 镇江铝艺大门 铝艺大门厂家 铝艺门