Epoxy floor has the advantages of seamless, easy cleaning, no dust accumulation, excellent compression and wear resistance, smooth surface, rich color, beautifying working environment, non-toxic ground, meeting the sanitary requirements, etc. Therefore, it is widely used in workshop, workshop, underground garage and other places. In order to keep the epoxy floor beautiful and beautiful, we should pay attention to the following points in the daily use process:1、经常清洁
1. Frequent cleaning
Cleaning is mainly to clean the sand and corrosive liquids on the surface of epoxy floor, because sand exists on the surface of the floor paint coating, which will increase the wear of the floor when people and vehicles walk. Soft broom or cloth can be used for daily cleaning of epoxy floor. When serious dirt occurs, neutral detergent should be used, washed with cloth, and then washed with water, fully dried, in epoxy. A thin wax is applied to the surface of the resin floor paint.
Corrosive liquids are the high-risk substances that erode the floor. Although the floor paint has certain anti-corrosion properties, it can only withstand 30% salt water and 10% sulfuric acid, and generally within 12 days. If the corrosive liquid concentration is higher than the value and the residence time exceeds the time limit, the floor will be damaged. When acid or alkali spills over the surface of epoxy floor paint, it should be cleaned with water in time. If it is seasoning or oil, it can be wiped with a rag.2、减少地面摩擦
2. Reducing ground friction
People and vehicles are the main sources of friction on epoxy floor. When employees enter the clean area of epoxy flooring, they should change into soft sole shoes to reduce the wear and tear of personnel. Forklift trucks and trailers used in epoxy flooring areas need to keep as steady as possible and avoid braking. When unloading and stacking the cargo, avoid scratching on the epoxy floor caused by the side and sharp angle of the cargo. Wheels of carts and carts should be made of rigid or elastic rubber wheels.3、及时修补
3. Repair in time
When the epoxy floor is damaged, it should be repaired in time so as to prevent the pollutants from penetrating into the coating and concrete. Once the stains penetrate into the interior and stubbornly combine with the formation, it will increase the difficulty of repairing. There are three common repair methods for epoxy flooring:
A. Spraying repair method
Advantages: Spraying repair method is the most advantageous repair method at present. The repaired floor not only has small traces, good aesthetics, but also saves materials.
Disadvantage: The construction is difficult, the technical requirements for the construction personnel are high, and professional spraying equipment is also needed.b.点补法
B. Point complement method
Point repair is the most commonly used repair method at present. Many constructors use this method to repair damaged epoxy floor.
Advantages: The construction method is relatively simple, easy to master, and the amount of raw materials used is relatively small.
Disadvantages: After repair, the traces are obvious, the aesthetics is poor, and the height is poor.c.整体遮盖法
C. Overall occlusion method
Disadvantage: The price of this floor paint is relatively high, and it is only suitable for repairing areas with smaller area and heavier corrosion.
The construction process refers to the epoxy floor construction technology.
标签:   环氧地坪 铝艺大门 铝艺大门厂家 铝艺护栏